Fence Cost Calculator
Price a new fence before you call anyone. Enter your linear feet, material, height, and gates and get an itemized installed cost range — fence line, gates, old-fence removal, and permit — plus the full materials list and a picket-fence mode that counts every picket, rail, and post.
- Itemized estimates — materials, labor, gates & removal separated
- Illinois guidance built in: frost-line post depth, permits & JULIE 811
- Serving Waukegan, Beach Park & Lake County since 2016
Get Your Free Quote
Tell us about your project and get a free, no-obligation quote for your home.
Here is the question every homeowner asks first: what will my fence actually cost? This fence cost calculator answers it in seconds. Measure your fence line in linear feet, pick a material — wood, vinyl, chain link, aluminum, or composite — add your gates, and you get an installed low-to-high total built from typical 2026 US pricing. No email required, no sales call, just the math. This page is homeowner cost guidance: it folds together our standard fence calculator, our installation-cost breakdown, and our picket fence calculator into one tool, so the numbers you see here are the same numbers those tools produced — now with the materials list, the labor anatomy, and a quote-fairness checker in one place.
Fence pricing is quoted per linear foot because that is how contractors buy materials and plan labor, but the per-foot rate hides big differences. A basic chain-link run can cost a third of a vinyl privacy fence per foot, and one wide driveway gate can cost as much as thirty feet of fence. The calculator below keeps those pieces separate — fence line cost, gate cost, removal, and permit — so you can see exactly where the money goes and which choices move the needle. New to measuring in linear feet? Our guide on how to calculate linear feet walks through it room by room and yard by yard.
Fence Cost Calculator & Materials Estimator
Two modes: Standard fence prices privacy, chain-link, and ornamental fences by the linear foot; Picket fence counts individual pickets, rails, and posts from your picket width and gap. Everything updates as you type.
Measure along the ground where the fence will stand. Do not subtract for gates — gates are priced separately below.
Most Lake County municipalities cap residential fences at 6 ft in side and rear yards.
Each gate is priced per gate — hardware, framing, and hanging labor do not scale with footage.
Adjusts the installation-labor line below, the way installers price digging difficulty.
The total linear feet of picket fence — measure along the ground where the fence will stand.
Narrow pickets with tight gaps need far more pieces than wide pickets with airy spacing — the count updates below.
| Item | Estimate |
|---|---|
| Materials list | — |
| Fence line (materials + standard labor) | — |
| Gates (installed) | — |
| Old fence removal | — |
| Permit | — |
| Of which: installation labor alone (terrain-adjusted, incl. concrete) | — |
Estimated project total: —
Estimates use typical 2026 US installed $/ft pricing (materials + standard labor). The labor line is a breakdown inside the fence-line cost — it is not added again in the total. Wide double-drive gates can run double the walk-gate figures. Free exact quotes: (858) 399-8124.
Is My Quote Fair?
Already holding a fence quote? Type it in and we’ll check it against the range this calculator just built for your footage, material, and gates:
Enter a quote above to see how it compares with your estimated range.
How This Fence Cost Calculator Works
- Measure your fence line. Walk the perimeter with a tape or measuring wheel and enter the total linear feet. Do not subtract for gates — gates get priced separately.
- Choose a material and height. Each material carries its own installed $/ft range, from budget chain link to premium composite, reflecting typical 2026 US contractor pricing. The height selector adjusts the per-foot rate (8-foot fences run about 25% more than 6-foot).
- Add gates and extras. Walk gates add a fixed installed cost each; old-fence removal runs $3–$5 per foot; most Lake County fence permits run about $150.
- Read your itemized numbers. Fence line, gates, removal, and permit are shown as separate lines with a combined project total and midpoint — plus the materials list (posts, sections, concrete) and, for wood, vinyl, and chain link, the installation-labor portion inside the total, adjusted for your terrain.
What the Inputs Mean (and the Math Behind Them)
Linear feet is the length of fence to be installed, measured along the ground. A typical suburban Chicago-area lot needs 120–200 linear feet for a full backyard enclosure. The calculator multiplies your footage by the material’s installed $/ft range.
Material sets the installed $/ft range (typical 2026 US estimates, materials + standard labor): wood privacy $17–$45, vinyl privacy $37–$70, chain link $11–$30, aluminum ornamental $26–$62, composite $35–$85. Wood is cheapest up front but needs staining every few years; vinyl and composite cost more and then nearly nothing.
Gates are priced per gate because hardware, framing, and hanging labor do not scale with footage: wood $250–$450, vinyl $300–$500, chain link $150–$300, aluminum $300–$500, composite $350–$600 each, installed. Wide double gates for driveways can cost double these figures.
Height adjusts the rate: 4-foot fences use about 10% less material and labor than 6-foot (×0.9), while 8-foot fences add roughly 25% (×1.25) for longer posts, deeper holes, and more material.
Posts, sections, and concrete are pure trade math: one 8-foot section per 8 feet of run (rounded up), one post per section plus the end post, plus two sturdier gate posts per gate. Concrete runs 1.5 bags of 80-lb mix per post, at about $6.50 per bag. So the default 150-foot wood fence above needs 19 sections, 22 posts, and 33 bags of concrete.
Installation labor is broken out because it is where quotes quietly diverge. Labor alone runs $10–$20 per foot for wood, $12–$22 for vinyl, and $7–$14 for chain link — before materials. Sloped yards add roughly 15% to that labor and rocky or heavy-clay soil about 30%, which is why the terrain selector only moves the labor line, never the materials.
Fence Cost by Material: Typical 2026 Installed Prices (US)
| Material (6 ft) | Installed $/ft (est.) | 150 ft + 1 gate (est.) |
|---|---|---|
| Wood privacy | $17–$45 | $2,800–$7,200 |
| Chain link | $11–$30 | $1,800–$4,800 |
| Vinyl privacy | $37–$70 | $5,850–$11,000 |
| Aluminum ornamental | $26–$62 | $4,200–$9,800 |
| Composite | $35–$85 | $5,600–$13,350 |
National 2026 estimates for a 6-foot fence on flat ground with normal soil. Rocky soil, slopes, old-fence removal ($3–$5/ft), and permits add to the total. Exact local pricing: (858) 399-8124.
What Does a Fence Cost by Length? Worked Examples
Length is the single biggest cost driver, so here are the calculator’s own numbers for three common project sizes — 6-foot fences, one walk gate, flat ground, no removal, permit not included:
| Fence length | Wood privacy | Vinyl privacy | Chain link |
|---|---|---|---|
| 100 ft + 1 gate | $1,950–$4,950 | $4,000–$7,500 | $1,250–$3,300 |
| 150 ft + 1 gate | $2,800–$7,200 | $5,850–$11,000 | $1,800–$4,800 |
| 200 ft + 1 gate | $3,650–$9,450 | $7,700–$14,500 | $2,350–$6,300 |
A worked example at the defaults: 150 feet of 6-foot wood privacy fence with one gate and the permit included comes to $2,950–$7,350 (midpoint $5,150) — $2,550–$6,750 of fence line, $250–$450 for the gate, and $150 for the permit. Switch on old-fence removal and the total becomes $3,400–$8,100, because tear-out adds $450–$750 on its own. That is exactly the line most low quotes leave out.
The Installation Half of the Bill: Labor, Concrete & Terrain
Here is a secret of the fencing trade: the cost to install a fence is often more than the fence itself. Materials are only part of the invoice — the rest is digging post holes, mixing and setting concrete, hauling away your old fence, and dealing with whatever your soil decides to do. Two quotes for “150 feet of wood fence” can differ by thousands when one includes removal and rocky-soil digging and the other does not.
| Fence type | Labor $/ft (est.) | 120 ft, flat ground (est.) |
|---|---|---|
| Wood privacy | $10–$20 | $1,200–$2,400 |
| Vinyl privacy | $12–$22 | $1,440–$2,640 |
| Chain link | $7–$14 | $840–$1,680 |
Labor only — materials are separate. Add ~15% for slopes, ~30% for rocky soil, $3–$5/ft for removal. Gate hanging alone runs $150–$300 per gate in labor, because each gate needs plumb, heavily braced posts and careful hardware alignment. When you compare quotes, demand the itemized version — materials, labor per foot, gates, removal, and permit as separate lines — and check it against the breakdown the calculator builds for your yard.
Picket Fence Calculator: Counting Every Picket, Rail & Post
Few things say “home” like a white picket fence — but pricing one is trickier than it looks. Switch the calculator above to Picket Fence mode and it does the fiddly math for you: how many individual pickets your run needs (based on picket width plus the gap between them), how many horizontal rails, how many posts, how much concrete, and what the whole thing costs installed.
Picket count is the heart of the math: each picket occupies its width plus the gap beside it, so pickets = run in inches ÷ (picket width + gap), rounded up. An 80-foot run (960 inches) with classic 3.5-inch pickets and 2.5-inch gaps needs 160 pickets; switch to 5.5-inch pickets with 3.5-inch gaps and it drops to 107. Add about 5% extra for cuts, splits, and warped culls when you order. Rails are the horizontal 2×4s the pickets fasten to — two per 8-foot section — and posts go at each section break plus the end.
| Material (3–4 ft) | Installed $/ft (est.) | 80 ft run (est.) |
|---|---|---|
| Cedar / wood picket | $17–$45 | $1,360–$3,600 |
| Vinyl picket | $37–$70 | $2,960–$5,600 |
Picket fences price higher per foot than solid privacy fences in the same material because each picket is individually spaced and fastened. The classic gap is 2–3 inches; tighter 1.5-inch gaps look formal and need noticeably more pickets, wider 3.5-inch gaps look casual and cut material cost. Whatever you choose, keep it consistent — cut a spacer block from scrap lumber and use it between every picket. Keep picket bottoms 2–3 inches above grade, too: wood wicks moisture from soil contact, which rots picket bottoms years before the rest of the fence fails. Gates, decorative scalloped tops, and post caps add to the totals above.
Fence Costs in Waukegan & Lake County, IL: Frost, Permits & HOAs
- Frost line comes first. In northern Illinois, fence posts should be set below the frost line — generally 36 inches deep minimum, with many Waukegan-area installers going 36–42 inches for gate and corner posts. The classic rule (one-third of the post underground) gives only 24 inches for a 6-foot fence, which is not enough here: frost heave will lift shallow posts within a few winters. Set posts in concrete, crown the concrete slightly above grade so water sheds away, and keep the bottom of wood posts out of standing water.
- Permits and height caps. Most Lake County municipalities, including Waukegan, require a fence permit, and many cap residential fence height at 6 feet in side and rear yards and 3–4 feet in front yards, with extra restrictions on corner lots for driver visibility. Permit fees are usually modest — often $50–$150 — but building without one can mean fines or a forced teardown. Always confirm your city’s current rules before you budget.
- Call JULIE (811) before digging. Request a free utility locate at least 48 hours before any post holes are dug. It costs nothing and prevents the most expensive mistake in fencing.
- HOAs and property lines. Many subdivisions add their own fence rules on top of the city’s — approved materials, colors, and heights — so check your HOA documents before ordering. And never trust old stakes or an existing fence line: a licensed survey ($300–$700 in the Chicago area) settles boundary questions permanently, and building even a foot onto a neighbor’s land can force a move at your expense. Discussing a shared side-yard fence with your neighbor first is common courtesy, and many neighbors will split a fence they both benefit from — get any agreement in writing.
- Soil and seasons. Lake County clay is common enough that mid-range labor figures are the realistic expectation, and crews work through Chicago-area winters as long as the ground is not frozen solid — off-season installs can come with faster scheduling.
What Affects Your Fence Cost?
- Material: chain link is cheapest, wood mid-range, vinyl and composite premium — but vinyl needs almost no maintenance for 25–30 years, while wood needs restaining every 2–4 years at $500–$1,500 a round.
- Length and height: cost scales directly with linear feet, and an 8-foot fence runs about 25% more per foot than a 6-foot one.
- Gates: each gate adds its own heavy posts, hinges, latch, and hanging labor — $150–$600 installed depending on material, and double-drive gates can run $500–$1,500+.
- Terrain and soil: slopes add ~15% to labor, rocky or heavy-clay soil ~30%.
- Old fence removal: tear-out and disposal adds $3–$5 per linear foot — the line most often missing from low quotes.
- Access: tight side yards, tree roots, and long carries from the truck all slow the crew and raise labor.
Common Fence Budget Mistakes
- Comparing totals instead of scopes. One contractor’s “$4,000 fence” includes materials, labor, concrete, one gate, and the permit; another’s excludes the gate, removal, and permit — a $1,500+ difference hiding in the fine print.
- Skipping the survey. Guessing the property line is the most expensive shortcut in fencing; verify first, build second.
- Setting posts too shallow. A 24-inch hole in northern Illinois is a leaning fence in three winters. Frost depth is not optional.
- Forgetting the gates. Homeowners budget the fence line and forget each gate is a mini-project of its own.
- Choosing on install price alone. Wood is cheapest to install and costs the most to own; run the 10-year math before deciding.
- Eyeballing picket spacing. Inconsistent gaps are the difference between a professional-looking picket fence and an amateur one — use a spacer block, every time.
DIY vs. Hiring a Pro
DIY installation saves the labor portion — roughly 40–50% of a professionally installed project’s cost — but the savings come with asterisks. You will spend $200–$500 on tool rentals or purchases (post-hole auger, concrete mixer), burn 2–4 weekends on digging and building, and own any mistakes: leaning posts, wavy lines, and gates that do not latch are the classic DIY outcomes. A professional crew typically installs 100–200 linear feet of wood or vinyl fence in 1–3 days, and chain link goes even faster.
DIY makes the most sense for short, simple chain-link runs on flat ground and for handy homeowners replacing a picket section or two. For long privacy fences, rocky or clay soil, multiple gates, or any run where the property line is in doubt, a pro crew’s speed, straight lines, frost-depth post setting, and warranty usually justify the labor cost. Either way, run your numbers above first — knowing the itemized range is what keeps both the DIY budget and the contractor quote honest.
Want an Exact Price, Not a Range?
Get a free on-site measurement and an itemized written quote for your home project — priced for your exact fence line, soil, and gates.
More Calculators & Related Guides
- Roofing Calculators Hub — every Zuniga calculator in one place
- How to Calculate Linear Feet — the measuring skill behind every per-foot estimate on this page
- Gutter Installation Cost Calculator — price new gutters with the same itemized approach
- Siding Calculator — working on the whole exterior? Price the walls to go with the fence
How Long Is a Fence Quote Good For — and Does a Fence Pay You Back?
Quote validity: 30 days is the industry standard. Material prices — especially wood and steel — move with commodity markets, so a quote written in spring may not hold in fall, and any contractor who honors one longer is doing you a favor. If a bidder pressures you with “this price expires today,” treat it as a sales tactic, not a material reality. Get the quote in writing with the line items, the validity period, and the payment schedule, then compare calmly.
Resale value: modest on paper, real in the market. Appraisers typically credit only a fraction of a fence’s install cost, yet buyers with dogs, kids, or privacy concerns will pay more for — and choose faster — a home that already has a sound fence. In the Waukegan market, an attractive, well-maintained privacy fence is a genuine selling feature, while a leaning, rotting one invites lowball offers. The best return comes from replacing a failing fence before listing, not from installing a new one purely as an investment.
Chain Link Fence Cost Calculator
Chain link plays by different pricing rules than the privacy fences above: fabric is priced by height and wire gauge, line posts space 10 feet apart instead of 8, and the top rail is its own line item. This dedicated estimator prices a chain link job the way a chain link quote is actually built — fabric, posts, top rail and fittings, gates, and labor, each on its own line.
Chain Link Fence Cost Estimator
Line-item estimate: fabric, posts, top rail, gates, and labor.
Estimates use typical 2026 US material + labor pricing. Galvanized is standard; vinyl-coated (black/green) adds ~15–25%. Free exact quotes: (858) 399-8124.
How the math works. Fabric runs about $3.50 per foot at 4 ft, $4.25 at 5 ft, and $5.00 at 6 ft, adjusted by wire gauge — light 11-gauge ×0.95, standard 11.5-gauge ×1.0, heavy-duty 9-gauge ×1.15 (gauge numbers run backward: 9-gauge is the thickest wire). Line posts are counted every 10 feet plus one, at $35 each installed; top rail and fittings add about $1.75 per foot; walk gates are $200 each; and labor runs $9–$16 per foot. Vinyl-coated fabric (black or green, which looks far better than raw galvanized) typically adds 15–25% to the fabric line.
| Height | Installed $/ft (est.) | 100 ft + 1 gate (est.) |
|---|---|---|
| 4 ft, galvanized | $11 – $22 | $2,010 – $2,710 |
| 5 ft, galvanized | $13 – $25 | $2,150 – $2,900 |
| 6 ft, galvanized | $15 – $30 | $2,350 – $3,200 |
Gauge, lifespan, and spacing — the three questions every chain link buyer asks. For most homes, 11.5-gauge fabric is the residential standard; step up to 9-gauge if you have large dogs, kids who climb, or a corner lot that takes abuse — it resists dents and stretching far better, and the price difference is modest next to the total job. A galvanized chain link fence typically lasts 20–25 years, and vinyl-coated fabric often reaches 25–30, as long as posts are set below the frost line and grass is kept trimmed off the bottom wire. Line posts space 10 feet apart; heavier terminal posts go at every corner, end, and gate.
Frequently Asked Questions
How much does a fence cost per linear foot in 2026?
As typical 2026 US installed estimates: chain link $11–$30/ft, wood privacy $17–$45/ft, aluminum ornamental $26–$62/ft, composite $35–$85/ft, and vinyl privacy $37–$70/ft. These ranges include materials and standard labor for a 6-foot fence on flat ground with normal soil. Slopes, rocky soil, difficult access, old-fence removal, and permits push costs toward the high end. In Waukegan and Lake County, IL, most residential projects land in the middle of their material’s range.
How much does a fence gate cost?
A standard 4-foot walk gate typically adds $150–$600 installed depending on material — chain link gates are cheapest, composite and ornamental aluminum most expensive — because the gate needs its own heavy posts, hinges, latch, and hanging labor regardless of the fence around it. Double-drive gates (10–12 feet wide) can run $500–$1,500+ since they need larger posts set deeper and often a drop rod or cane bolt.
How many pickets do I need for my fence?
Divide your fence run in inches by the sum of one picket’s width plus the gap beside it, and round up. For example, an 80-foot run (960 inches) with 3.5-inch pickets and 2.5-inch gaps: 960 ÷ 6 = 160 pickets. Order about 5% extra for cuts, splits, and warped culls. Also figure two 8-foot 2×4 rails per section, one post per 8 feet plus the end post, and 1.5 bags of concrete per post.
How much does it cost to remove an old fence?
Old fence removal and disposal typically costs $3–$5 per linear foot — so tearing out 120 feet of worn wood fence runs about $360–$600. The price covers pulling posts (often with concrete footings attached), cutting up panels, and dump or haul-away fees, which are the expensive part. If posts were set in big concrete footings or the fence is entangled with roots, expect the high end. Some contractors discount removal when they win the replacement job, so always ask.
How deep should fence posts be in Illinois?
In northern Illinois, fence posts should be set below the frost line — generally 36 inches deep minimum, with many Waukegan-area contractors going 36–42 inches for gate and corner posts. The classic rule (one-third of the post underground) gives 24 inches for a 6-foot fence, which is not enough here; frost heave will lift shallow posts within a few winters. Set posts in concrete, crown the concrete slightly above grade so water sheds away, and keep the bottom of wood posts out of standing water.
Do I need a permit for a fence in Waukegan, IL?
Most Lake County municipalities, including Waukegan, require a fence permit, and many cap residential fence height at 6 feet in side and rear yards and 4 feet in front yards, with extra restrictions on corner lots for driver visibility. Permit fees are usually modest — often $50–$150 — but building without one can mean fines or a forced teardown. Always confirm your city’s rules and call JULIE (811) for a free utility locate at least 48 hours before digging.
Wood vs. vinyl fence — which is better?
Wood wins on upfront cost and natural looks; a cedar privacy fence is the classic suburban choice and the cheapest way to get full privacy. Vinyl wins on lifetime cost and maintenance — no staining, no rot, no splinters, and it shrugs off Lake County’s wet springs and freeze-thaw winters for 25–30 years. Wood costs $500–$1,500 every few years to maintain, so vinyl often breaks even within 8–12 years. Choose wood for budget and character, vinyl for set-and-forget.
Is it cheaper to install a fence yourself?
DIY installation saves the labor portion — roughly 40–50% of a professionally installed project’s cost — but the savings come with asterisks. You will spend $200–$500 on tool rentals or purchases, burn 2–4 weekends on digging and building, and own any mistakes: leaning posts, wavy lines, and gates that do not latch are the classic DIY outcomes. DIY makes the most sense for short, simple chain link runs on flat ground. For long privacy fences, rocky soil, or multiple gates, a pro crew’s speed and warranty usually justify the labor cost.
Ready to Get Started?
Free on-site measurement and an itemized written quote for your home project — serving Waukegan and Lake County since 2016.