🏠 Metal Roof — Waukegan & Lake County, IL📞 (858) 399-8124

Metal Roof Cost Calculator

Price a metal roof three ways in one tool: an itemized installed cost for standing seam, metal shingle, and corrugated panels; a side-by-side comparison of all five metals; and a full panel & material takeoff — plus a built-in checker that tells you whether a contractor’s quote is fair. No address, no email, no obligation.

📞 Call (858) 399-8124

  • Standing seam is our specialty — installed across Lake County
  • Free inspections & honest, no-pressure quotes
  • Licensed, insured & warranty-backed workmanship

Get Your Free Quote

Exact metal roof pricing for your home — no obligation.

A metal roof is the last roof most homeowners ever buy — 40 to 70 years of service, serious hail resistance, and curb appeal that asphalt cannot match. It is also the roof with the widest price spread in the business: the same 2,000 sq ft roof can be quoted anywhere from $14,000 in corrugated steel to $60,000 and beyond in standing seam or copper. This page exists so you can see exactly where your number should land, and why. Use the itemized calculator for a budget, the comparison mode to shop all five metals at once, and the takeoff mode when you need real panel counts for an order or a supplier quote.

Standing seam metal roof installed on a Lake County home — metal roof cost calculator

Metal Roof Cost Calculator — Three Tools in One

Pick a mode. Installed Cost itemizes one roof. Compare 5 Metals prices every metal on the same roof at once. Panels & Materials counts what you would actually order. Everything updates as you type — no button, no signup.




Use roof surface area, not living space — 1 roofing square = 100 sq ft, so 2,000 sq ft = 20 squares. Don’t know it? Measure it with our roof area and squares calculator.


Installed rates before the pitch adjustment below. Shopping stone-coated steel or copper too? The Compare mode prices all five metals, including both.


Steeper roofs slow the crew and add safety setup, so labor carries a multiplier. Not sure of your pitch? Find it with the roof pitch calculator.


Metal is light enough to install over one sound shingle layer in many cases, which is the single easiest way to cut a metal roof quote — see the tear-off section below.

Cost component Estimated range
Materials —
Labor —
Tear-off & disposal —
Total installed cost —

Materials are estimated at 60% of the installed rate and labor at 40% before the pitch multiplier — the split our estimators see on typical Lake County metal jobs. Complex rooflines, deck repairs, and premium finishes can move the final number.

Is My Quote Fair?

Already holding a contractor’s bid? Enter it here and we’ll check it against the range for the roof you just described above.


Compared against the Installed Cost range above — change those inputs and the verdict updates too.

Enter a quote to check it against your range.


The same roof, priced in all five metals at once. Tear-off is not included here — budget an extra $1.75–$3.00 per sq ft if the old roof has to come off.


Every valley, dormer, and chimney adds cuts, flashing, and crew hours — complexity is priced as a multiplier on the whole job.


The highlighted metal gets the big-number summary under the table.

Metal Expected life Installed range
Standing seam steel 40–70 years —
Corrugated / exposed-fastener steel 30–50 years —
Metal shingles & shake 40–60 years —
Stone-coated steel 40–70 years —
Copper 70–100+ years —

Per-square-foot bands: standing seam $9–$16, corrugated $5–$12, metal shingle $6–$14, stone-coated $8.50–$14, copper $16–$38 — before the complexity multiplier. In Lake County, labor rates land most homes in the middle-to-upper part of each band.


Measure along the bottom edge of one roof plane, in feet.


The sloped distance a panel has to climb, not the horizontal run.


A simple gable roof has 2 planes. This layout assumes equal planes — run it once per section on uneven roofs.


Coverage, not overall width — an 18″ standing seam panel typically covers 16″ after the seam. Check the spec sheet.


Panels longer than the slope ship as one piece with no end laps. Shorter stock stacks with a 6″ lap per joint.


Material-only shopping? The takeoff counts below are the order list; this rate simply converts the same roof into an installed-cost range.


Waste covers end laps, angle cuts at valleys and rakes, and the occasional miscut. It is the industry-standard allowance, not padding.

Takeoff item Quantity
Panels per plane —
Total panels —
Panels incl. waste allowance —
Roof area —
Roofing squares —
Underlayment rolls (1,000 sq ft synthetic) —
Fasteners —
Drip edge —
Ridge cap —
Closure strips —
Estimated installed cost —

Fastener style follows the metal: standing seam, zinc, and copper use concealed clips (about one per 2 ft of panel); exposed-fastener profiles use roughly 80 screws per roofing square. Trim is figured for a simple gable — add about 15% for hips.

How This Metal Roof Calculator Works

Three modes, three different jobs — here is exactly how each one thinks, with nothing hidden:

  1. Installed Cost mode starts from your roof area and the installed rate for the panel type you pick, then splits the total the way estimators do: about 60% materials, 40% labor, with a pitch multiplier (1.0 low, 1.1 moderate, 1.25 steep) applied to labor only, and tear-off added at $1–$2 per sq ft when the old roof comes off. At the defaults — 2,000 sq ft, standing seam, moderate pitch, tear-off included — it returns $26,960–$45,600: materials $14,400–$24,000, labor $10,560–$17,600, tear-off $2,000–$4,000, a midpoint of about $36,280.
  2. Compare 5 Metals mode holds the roof constant and swaps the metal, applying a complexity multiplier (×1.00 simple, ×1.12 moderate, ×1.25 complex) to five published rate bands, with expected lifespan beside each price — because a 30-year corrugated roof and a 70-year copper roof are not the same purchase even when the quotes rhyme.
  3. Panels & Materials mode does the layout math a supplier does: panels across the eave by coverage width, length rows with a 6″ end lap when stock runs short, a waste allowance for cuts, then underlayment rolls, fasteners, trim, and closures derived from the same counts — plus an installed-cost range so the takeoff is also a budget check.

None of the three modes knows your valleys, your decking condition, or your chimney count. Treat the output as a defensible range for planning and quote-checking — the exact number still comes from a tape measure on your roof.

Metal Roof Cost by Type

Installed prices per square foot for the three most common residential systems, at Lake County labor rates:

Metal roof type Installed cost per sq ft Expected life Best for
Corrugated panels $7–$12 30–45 years Budget installs, garages, barns, modern farmhouse looks
Metal shingle $10–$18 40–60 years Homes that need a traditional shingle profile with metal life
Standing seam $12–$20 50–70 years Premium homes, low slopes, the longest service life
Stone-coated steel $8.50–$14 40–70 years Tile or shake looks without the weight
Copper $16–$38 70–100+ years Historic homes, accents, bays, and lifetime roofs

Close-up of standing seam metal roof panels — metal roof material calculator

One Illinois note the national averages miss: labor alone on a metal install here commonly runs $4–$8 per sq ft, which is why Lake County quotes tend to land in the middle-to-upper part of every band above. A quote at the very bottom of a band usually means something was left out — underlayment grade, snow retention, or the tear-off line.

The Five Metal Roofing Types, Explained

Standing seam steel is the premium residential standard: tall vertical ribs, concealed clips, no exposed screws to back out or rust. It handles low slopes, sheds snow cleanly, and carries the longest warranties — which is why it anchors the top of the residential price bands and why it is the system we install most.

Corrugated / exposed-fastener steel is the value play: wavy or ribbed panels screwed through the face. It goes up fast and prices lowest, but the exposed screws are a maintenance item — they need re-seating and washer replacement over the roof’s life, and the lighter gauges dent more easily in hail.

Metal shingles & shake stamp steel or aluminum into shingle, shake, and slate profiles. You get metal’s lifespan with a look the neighborhood association recognizes, at a mid-range price — a common choice when a standing seam profile would fight the house’s style.

Stone-coated steel bonds stone granules to a steel core, mimicking clay tile or wood shake at a fraction of the weight. It is quiet in rain, walks well, and suits Mediterranean and shake-style homes that cannot carry real tile.

Copper is the lifetime outlier: it can outlive the house, develops the famous green patina, and prices accordingly. Most homeowners use it where it shows — bay windows, porches, turrets, and accents — rather than across the whole roof.

What Affects the Cost of a Metal Roof?

  • Panel type and gauge. The biggest single lever. Heavier 24-gauge steel costs roughly 25–40% more than 26-gauge and shrugs off hail and foot traffic far better.
  • Roof size and pitch. Price follows surface area, and steep pitches (8:12 and up) add labor time, safety setup, and material handling — the calculator’s 1.25 pitch multiplier exists for a reason.
  • Roof complexity. Valleys, hips, dormers, and skylights multiply cuts, flashing pieces, and crew hours; the comparison mode prices this at up to ×1.25.
  • Tear-off. Removing and disposing of the old roof runs $1–$2 per sq ft on a standard job, and $1.75–$3.00 on complex or multi-layer tear-offs.
  • Underlayment. High-temperature ice-and-water shield at eaves and valleys — close to non-negotiable in Illinois — costs more than plain felt and is worth every cent.
  • Finish. PVDF (Kynar) coatings outlast cheaper SMP paints by years in color retention; on a 50-year roof, the finish warranty matters as much as the metal.
  • Penetrations and flashing. Every chimney, vent stack, and skylight needs custom flashing metal bent and sealed by hand.
  • Snow retention. Bars or guards above entries and walkways are a small line item that prevents roof avalanches in Lake County winters.

Panel & Material Takeoff: How the Numbers Are Counted

Ordering metal roofing is unforgiving math: order too little and the crew idles while a second delivery crawls through Chicago traffic; order too much and you pay restocking fees on panels cut to your length. The takeoff mode above mirrors how professional estimators count:

  • Coverage width, not panel width. This is where most DIY estimates go wrong — a panel sold as 18″ wide may cover only 16″ after the seam or side lap. Panels per row = eave length in inches ÷ coverage width, always rounded up.
  • Length rows and end laps. If the slope is longer than the stock sheet, rows stack with a 6″ lap at each joint. Full-length panels — slope shorter than stock — eliminate laps entirely and are worth ordering on most homes.
  • Waste is an allowance, not padding. 5% for simple rectangles, 10% for a typical gable, 15% for hips and dormers, 20–25% for cut-up roofs. It covers angle cuts at valleys and rakes plus the occasional miscut.
  • Accessories scale from the same counts. Underlayment comes in 1,000 sq ft synthetic rolls; exposed-fastener roofs need roughly 80 screws per square, while standing seam uses concealed clips at about one per 2 ft of panel; foam closure strips seal the profile at eaves and ridge, two per panel.

Roofers installing standing seam metal roof panels on a brick home — metal roof installation cost

Worked example, using the takeoff defaults: a 40 ft eave and 25 ft slope across 2 planes with 16″ coverage panels gives 30 panels per row, 2 rows per plane (25 ft of slope over 20 ft stock, lapped), 120 panels total and 132 with the 10% waste allowance — covering 2,000 sq ft (20 squares), needing 3 underlayment rolls, about 750 concealed clips, 80 LF of drip edge, 40 LF of ridge cap, and 264 closure strips, at an estimated installed cost of $20,000–$32,000 in standing seam.

Gauge & Coatings: The Illinois Upgrade Decision

Two upgrades decide whether a metal roof still looks new at year 25. Gauge: 24-gauge steel is the safer long-term pick for Lake County homes — it resists hail dents and foot traffic better and holds flat, oil-can-free lines on standing seam panels, for roughly 25–40% more than 26-gauge. Reserve 26-gauge for budget corrugated installs and outbuildings. Coating: PVDF (Kynar) finishes carry the long color warranties; SMP paints are the budget tier and chalk and fade sooner. On a roof you intend to keep for decades, the PVDF upgrade is usually the cheapest money in the whole quote. And under the panels, specify high-temperature ice-and-water shield along eaves and valleys — freeze-thaw cycling and ice dams punish cheap underlayment far more than the panel choice does.

Tear-Off vs. Installing Over Shingles

Metal’s light weight — about 1 to 1.5 lb per sq ft — makes it the one roofing material that can often go directly over a single layer of existing shingles, with proper underlayment or furring. Skipping tear-off saves the $1–$2 per sq ft in the calculator (about $2,000–$4,000 on a 2,000 sq ft roof) and a day or more of labor. The conditions are strict, though: the deck must be sound and flat, there can be only one existing layer, and local code must allow it. If the deck is soft, the roof already has two layers, or you want the deck inspected and re-nailed — all common on older Lake County homes — full tear-off is the right call, and on complex or multi-layer jobs budget $1.75–$3.00 per sq ft for it. When in doubt, the free inspection settles it: we check the deck from the attic side before recommending either route.

Want an Exact Price, Not a Range?

Get a free on-site roof inspection and an itemized written quote from Zuniga Roofing Inc. — measured squares, named panels and gauges, no surprises.

Call (858) 399-8124

Roofing Calculators & Related Guides

More Metals, Priced: R-Panel, Galvanized, Aluminum, and Zinc

The calculator above prices the five metals we install most. Four more show up in Illinois bids often enough to deserve reference numbers — typical 2026 US installed ranges, materials plus labor:

Metal type Typical installed $/sq ft
R-panel / ribbed steel $8 – $13
Galvanized steel $9 – $14
Aluminum $11 – $17
Zinc $14 – $20

One more Illinois wrinkle: HOA approval. Many Chicago-area homeowners associations regulate roofing materials and colors. Standing seam in muted tones usually passes architectural review; bright corrugated panels often do not. Check your HOA’s architectural guidelines before collecting bids, and bring a manufacturer color sample to the approval meeting — a denied installation after the deposit is the most expensive kind of surprise.

Frequently Asked Questions

How much does a metal roof cost for a 1,000 sq ft house?

A metal roof on a 1,000 sq ft house typically costs $7,000–$29,000 installed depending on the metal you choose. Corrugated panels run $7–$12 per sq ft, metal shingles $10–$18, and standing seam $12–$20 — and premium copper can exceed $29 per sq ft. Roof pitch, tear-off, and penetrations like chimneys and skylights move the final quote, so treat any single number as a starting range, not a bid.

How much does a metal roof cost for a 2,000 sq ft house?

A 2,000 sq ft metal roof typically runs $14,000–$60,000 installed across the common panel types. At this calculator’s default settings — standing seam, moderate pitch, one tear-off layer — the itemized estimate is $26,960–$45,600 (materials $14,400–$24,000, labor $10,560–$17,600, tear-off $2,000–$4,000). Corrugated lands at the low end of the range; copper and complex rooflines land at the top.

Is a metal roof cheaper than shingles?

Not upfront. Asphalt shingles run about $3.50–$5.50 per sq ft installed versus $7–$30 for metal, so metal costs roughly two to three times more on day one. The math flips over time: a quality metal roof lasts 40–70 years against 15–25 for shingles, so one metal roof can replace two or three shingle roofs — and it usually wins on lifetime cost, energy savings, and resale value.

Can a metal roof be installed over existing shingles?

Often, yes. Metal panels are light — about 1 to 1.5 lb per sq ft — and many Illinois codes allow installation over one layer of shingles with proper underlayment or furring, which saves the $1–$2 per sq ft tear-off in the calculator. The deck must be sound and flat, though: if there is rot, sagging, or a second layer already in place, tear-off is the right call.

What is the biggest problem with metal roofs?

The upfront price. Metal costs two to three times more than asphalt shingles on installation day, and that sticker shock stops most homeowners before they see the lifetime math. Secondary issues are real but manageable: rain noise without solid decking and insulation, dents from large hail on softer metals, and expansion movement that demands an installer who details slots and clips correctly.

Does a metal roof lower insurance or energy costs?

It can. Many insurers discount premiums for impact-resistant metal roofing — Class 4 rated panels in particular — because they survive hail that destroys shingles. Reflective metal finishes also cut attic heat gain, and homeowners commonly see cooling savings. Ask your insurer about the discount before you sign; the exact credit varies by carrier and policy.

How many metal roofing panels do I need?

Count them from coverage width, not panel width. Divide the eave length in inches by the panel’s coverage width to get panels per row, then multiply by the number of length rows and roof planes, and add about 10% for waste and cuts. For a 40 ft eave, 25 ft slope, 2-plane roof with 16-inch coverage panels, the Panels & Materials mode above counts 30 panels per row, 120 total, and 132 with the waste allowance.

Should I choose 24-gauge or 26-gauge steel for an Illinois roof?

For most Lake County homes, 24-gauge is the safer long-term pick: it resists hail dents and foot traffic better and holds flat, oil-can-free lines on standing seam panels, for roughly 25–40% more than 26-gauge. Reserve 26-gauge for budget corrugated installs and outbuildings, and pair either gauge with a PVDF (Kynar) finish if you want the color to outlast the warranty.

Ready to Get Started?

Tell us about your metal roof project and get a free, exact quote — standing seam is our specialty, and every install is warranty-backed.

Call (858) 399-8124

Scroll to Top